Print Page | Close Window

Fuel tank webbing WD45

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=41103
Printed Date: 06 Jul 2025 at 3:17am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Fuel tank webbing WD45
Posted By: Brampton 02 gt
Subject: Fuel tank webbing WD45
Date Posted: 25 Nov 2011 at 6:05pm
I am putting my tractor back together and am wondering if the joint in the tank webbing should go under the tank?
thanks



Replies:
Posted By: Rfdeere
Date Posted: 25 Nov 2011 at 8:34pm
   The strap should be on top of the hood and the tank under the hood. Back edge of strap should be even with back edge of hood. If that is what your asking ?

-------------
Randy Freshour,Member Indiana AC Partners,
http://www.rumelyallis.com" rel="nofollow - http://www.rumelyallis.com


Posted By: Brampton 02 gt
Date Posted: 25 Nov 2011 at 9:13pm
thanks, but I purchased the mesh/fabric material that goes under and top of the tank and I am not sure how it is best put on.


Posted By: Kip-Utah
Date Posted: 26 Nov 2011 at 10:33am
Webbing goes between the tank and saddle mount under the tank. Hood goes on top of tank metal to metal with no webbing.

-------------
HANSEN'S OLD ORANGE IRON. Showing, Pulling, & Going!!


Posted By: Lonn
Date Posted: 26 Nov 2011 at 11:23am
I glued a thin strip of webbibg to the underside of the hood where it meets the gas tank and it works well. You can't see it either. It's really only necessary under the tank though.

-------------
-- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... -
Wink
I am a Russian Bot


Posted By: TomMN
Date Posted: 26 Nov 2011 at 3:49pm
There are two pieces of webbing strips, a wide one for under the tank, and a narrower strip that goes all the way across the top and sides of the tank right under the hood about where the metal strap holds it down.  The hood shouldn't have any ability to touch the tank.


Posted By: Lonn
Date Posted: 26 Nov 2011 at 6:51pm
There is a packing strip listed in the WD parts book. Shown under the hood between the hood and gas tank.
 
http://www.agcopartsbooks.com/PartsBooksN/Viewer/book.aspx?book=agco/79001544 - http://www.agcopartsbooks.com/PartsBooksN/Viewer/book.aspx?book=agco/79001544


-------------
-- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... -
Wink
I am a Russian Bot



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net