Farm Equipment - Allis G fan shaft bearings

Print Page | Close Window

Allis G fan shaft bearings

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=40956
Printed Date: 28 Jul 2025 at 6:44am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Allis G fan shaft bearings

Posted By: lbr
Subject: Allis G fan shaft bearings
Date Posted: 22 Nov 2011 at 4:30pm

I remebered a post sometime ago that someone had the bearing numbers for the fan shaft on a G. Could someone tell me what the part#'s were for both the bearings. Thanks

Replies:

Posted By: MNLonnie
Date Posted: 22 Nov 2011 at 5:23pm

That ended up being a huge argument on prices. Here is the post.

http://www.allischalmers.com/new/forum/forum_posts.asp?TID=33651&KW=shaft+bearing&PID=255562&title=g-fan-bearings-i-think#255562 - http://www.allischalmers.com/new/forum/forum_posts.asp?TID=33651&KW=shaft+bearing&PID=255562&title=g-fan-bearings-i-think#255562

-------------
Waukesha B, B, IB, G, styled WF, D15, 615 backhoe, 2-Oliver OC3's, 4 Ford Model T's, 3 Model A Fords, AV8 Coupe, AV8 Roadster, 1933 Ford Wrecker

Posted By: wfmurray
Date Posted: 22 Nov 2011 at 5:37pm

Get you a good mike and get all measurement plus seals and grooves and do some searching on internet . Got 4 bearing for a corna bush hog trans for 36 plus and that included shipping.

Posted By: lbr
Date Posted: 22 Nov 2011 at 7:31pm

Thanks for the replies

Posted By: Scott(GA)
Date Posted: 20 Jan 2012 at 7:35pm

A bit late but...

I have a DELCO Farm & Off Road Equipment Manufacturers To NDH Bearings Cross Reference Lists [Bulletin 2A-138-3] dated November 1974 that I acquired on eBay.

This document indicates that:

Allis-Chalmers Part # 800420 (Fan End) is NDH # 488016

Allis-Chalmers Part # 800421 (Pulley End) is NDH # 488503

Best regards,

Scott

Posted By: Warren(Oh)
Date Posted: 20 Jan 2012 at 8:46pm

488016 is for the fan end of the shaft; 488503 is for the pulley end. NDH and MRC use the same numbers.