decal placement
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=39278
Printed Date: 13 Sep 2025 at 11:41am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: decal placement
Posted By: EClark
Subject: decal placement
Date Posted: 20 Oct 2011 at 7:08pm
|
any one have any good pictures of a early series 1 D17? need to get decals on mine and want them on where they should be Thanks Eric
|
Replies:
Posted By: allis6080
Date Posted: 23 Oct 2011 at 7:04pm
|
bump ------------- 6060 s\n 5016 1947 JD B |
Posted By: Dave in il
Date Posted: 23 Oct 2011 at 7:23pm
|
Posted By: DSeries4
Date Posted: 23 Oct 2011 at 10:03pm
Dave's is close, but it is angled the wrong way. Here is my original D14 for reference. ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
Posted By: Dipstick In
Date Posted: 23 Oct 2011 at 10:57pm
|
Eric if you're putting on decals you must be making headway,maybe I'll have to get my fat butt in the explorer and run down tomorrow evening and check you out!! ------------- You don't really have to be smart if you know who is! |
Posted By: EClark
Date Posted: 24 Oct 2011 at 7:38pm
|
that helps but I have a couple that I'm in question on. one says keep all shields in place,an disengage p.t.o. before dismounting,and the snap coupler decal, an power crater motor? guess that's more than a couple Thanks Eric
|