Farm Equipment - SFW D15; S1

Print Page | Close Window

SFW D15; S1 - SII w/ PS

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=38619
Printed Date: 02 Oct 2025 at 10:42am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: SFW D15; S1 - SII w/ PS

Posted By: TimNearFortWorth
Subject: SFW D15; S1 - SII w/ PS
Date Posted: 09 Oct 2011 at 8:39am

May have found a SFW Series One D15 and would like to know if this would bolt up to my SII SC tractor with power steering?

Have not viewed the Series One SFW as yet and it is about a 3-1/2 hour drive away.

Also do not know if this non running Series one has power steering.

Would the bolster be typical?

If I recall, the PS can be added to the tractors without PS as the bolster is the same?

Appreciate any input.

Thanks

Replies:

Posted By: RichinWis
Date Posted: 09 Oct 2011 at 8:55am

Yes it can be changed without removing the bolster, series I same as II

Posted By: TimNearFortWorth
Date Posted: 09 Oct 2011 at 9:33am

Thanks; will it work on my PS tractor, if the SFW tractor did not havs PS?

Sounds like it will bolt up, but will my PS work?

Thanks

Posted By: D-17_Dave
Date Posted: 09 Oct 2011 at 2:47pm

Power steering is in the bolster. All that stays on the tractor. Unbolt the pivot under the bolster and drop the WFE along with the rear pivot. Remove the WFE crank arm for the tie rods. The SFW pedestal will bolt right up to the bolster with more bolts than the pivot used.