D17 throttle linkage
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=38031
Printed Date: 19 Jul 2025 at 12:11am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D17 throttle linkage
Posted By: Charlie175
Subject: D17 throttle linkage
Date Posted: 28 Sep 2011 at 6:42am
|
I'm looking to find the Governor Control Rod Rear (This hooks to the throttle control lever, bottom), and the Ball Clamp. Mine is wore out. The rod I can probably fix but the ball clamp I can't ------------- Charlie '48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD |
Replies:
Posted By: Charlie175
Date Posted: 28 Sep 2011 at 6:43am
|
Also what is the purpose of that big spring? Mine is broke but I guess it puts tension on the linkage? ------------- Charlie '48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD |
Posted By: Skyhighballoon(MO)
Date Posted: 28 Sep 2011 at 7:22am
|
Charlie - McMasterCarr has the ball clamp way cheaper than AGCO: http://www.mcmaster.com/#ball-joints/=e9aboy - http://www.mcmaster.com/#ball-joints/=e9aboy Mike ------------- 1981 Gleaner F2 Corn Plus w 13' flex 1968 Gleaner EIII w 10' & 330 1969 180 gas 1965 D17 S-IV gas 1963 D17 S-III gas 1956 WD45 gas NF PS 1956 All-Crop 66 Big Bin 303 wire baler, 716H, 712H mowers |
Posted By: Charlie175
Date Posted: 28 Sep 2011 at 7:52am
|
Maybe I didn't see the right one on that page but what I have a clamp that goes on to the rod with a ball on top to fit the other link rod so that it can rotate freely. ------------- Charlie '48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD |
Posted By: Clay
Date Posted: 28 Sep 2011 at 9:44am
| http://www.mcmaster.com/#ball-joints/=e9c5kp - http://www.mcmaster.com/#ball-joints/=e9c5kp |
Posted By: Brian G. NY
Date Posted: 28 Sep 2011 at 9:44am
|
This one looks similar to the one on my D-17.
http://www.mcmaster.com/#ball-joints/=e9c41w - http://www.mcmaster.com/#ball-joints/=e9c41w
I'm not sure what that big spring is for either.
Mine was also broken and I replaced it with a similar one
I happened to havr in "stock".
I guess the throttle works a little better with it than without it.
|
Posted By: Brian G. NY
Date Posted: 28 Sep 2011 at 9:47am
|
I meant to zero in on this one.
http://www.mcmaster.com/nav/framework.asp?ReqTyp=CATALOG&CtlgPgNbr=1181&CtlgEdition=117&fam=RodEnds&ppe=5&ppr=1&psm=3&psl=4&k1=6154K11&t1=PN&k2=6154K13&t2=PN&k3=6154K12&t3=PN&k4=6154K15&t4=PN&k5=6154K14&t5=PN - View catalog page
http://www.mcmaster.com/param/asp/PSearch2.asp?reqTyp=parametric&act=psearch&FAM=RodEnds&FT_2922=132686&FT_3034=153624&FT_3473=158374&session=RodEnds%3B2922%3D132686%3B3034%3D153624%3B3473%3D158374&ScreenWidth=1280&McMMainWidth=1002#ItemsTable - Compare products (5) 5 products match your selections 
These 5 products match your selections
|
Posted By: Ky.Allis
Date Posted: 28 Sep 2011 at 1:25pm
| My parts book calls the spring a Compensating spring. I just put a new one on my D-17 and the only difference I see is that the throttle responds a little quicker. Without it you had to pull throttle down quite a bit before engine would speed up. |
Posted By: Charlie175
Date Posted: 29 Sep 2011 at 7:19am
|
I ordered one of those ball clamps, thanks for the help. I will source a spring locally to see what it does. ------------- Charlie '48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD |
Posted By: Charlie175
Date Posted: 29 Sep 2011 at 12:12pm
|
Wow, placed order yesterday afternoon and it arrived today. Nice service! ------------- Charlie '48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD |
Posted By: norm[ind]
Date Posted: 29 Sep 2011 at 7:56pm
| we have the special throtle spring 1-800-254-3116 |