New All-Crop grain drag
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=34059
Printed Date: 13 Oct 2025 at 5:41pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: New All-Crop grain drag
Posted By: TomYaz
Subject: New All-Crop grain drag
Date Posted: 17 Jul 2011 at 5:47pm
|
Protoype roller chain style going to send to a customer to try out:
 ------------- If its not an All-Crop, it all crap! |
Replies:
Posted By: Tycer
Date Posted: 19 Jul 2011 at 9:19pm
| Nice. It looks like it will outlast the sprockets easily. |
Posted By: Steve M C/IL
Date Posted: 19 Jul 2011 at 10:02pm
| The bottom of the drag hangs a fair bit lower than the chain.I don't see that feature in your new chain. |
Posted By: TomYaz
Date Posted: 20 Jul 2011 at 5:51am
Thats not my recollection...but I will check out an original to be sure...I gave the manufacturer the original; will call him as well. ------------- If its not an All-Crop, it all crap! |
Steve M C/IL wrote:Posted By: Jim Lindemood
Date Posted: 20 Jul 2011 at 7:23am
| Let us know how the test worked out --- |
Posted By: TomYaz
Date Posted: 20 Jul 2011 at 7:34am
Ok will do.
On the drag chain, my understanding is the bar is flared on the ends to mate up with the elevated mounting tabs on the link. this allows the bar to be flush with bottom of the link whilst being connected to the higher situated tab. Becasue of this bend, if one looks at the top of the chain, one would get the impression that the bar was lower than the link.
------------- If its not an All-Crop, it all crap! |