Farm Equipment - L250 new holland skid steer.Help

Print Page | Close Window

L250 new holland skid steer.Help

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=33208
Printed Date: 11 Aug 2025 at 12:10pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: L250 new holland skid steer.Help

Posted By: steve(oh)
Subject: L250 new holland skid steer.Help
Date Posted: 02 Jul 2011 at 4:35pm

I am working on a L250, the lift arms wont raise. I jumped the solinod and they did works so I know that it is ok. I have jumped both the seat and seat belt safty switchs and I still do not have voltage back to the solinod. Everything else works, (starts, moves, bucket works). I have all of the lights on the computer module. I ohmed the hot and ground wire. Hot wire ohms out at .4 ohms and the ground ohms out at 3.9 ohms. I am running out of ideas. my guess right now is that the computer module is bad but i am not sure Thanks for the help Steven.

Replies:

Posted By: Coke-in-MN
Date Posted: 02 Jul 2011 at 4:48pm

Why I liked my NH 185 (no computer) LX190 had a few problems like that also but found a open which you seem not to have.

Those safety switches have to complete a circuit tothe lift solonoid somewhere so has to be a open in that circuit or a solonoind or relay that is not passing signal to boom control.

-------------
Life lesson: If you’re being chased by a lion, you’re on a horse, to the left of you is a giraffe and on the right is a unicorn, what do you do? You stop drinking and get off the carousel.