Front Hyd Pump - Old B
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=29791
Printed Date: 28 Aug 2025 at 1:42am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Front Hyd Pump - Old B
Posted By: Texas B
Subject: Front Hyd Pump - Old B
Date Posted: 26 Apr 2011 at 9:46am
|
Has anyone ever seen a dual set of pulleys put on the front of the front pulley and put a hyd pump on an older B? The pulleys are brazed to the WP pulley - thinking I might be in real trouble on replacing front seal. ------------- Texas B 39 |
Replies:
Posted By: junkman
Date Posted: 26 Apr 2011 at 11:53am
| Yes I seen a power steering pump put on a b off of a car. he used it to lift his belly mount grader blade. Didn't look exactly as to how the setup worked but it had it's own belt |
Posted By: wigtrain
Date Posted: 26 Apr 2011 at 3:21pm
|
All three of my B's are set up this way. No problem with the front seal as when the standard pulley comes off so does the hyd pump pulley. Gives me live hyd for any implements I use. Did need to cut a notch in the radiator support bracket for belt clearence but the correct police don't get to look at my tractors. Works fine for me. Cut the center out of the pulley being brazed on so that the hand crank will still work and all should be well. ------------- Jim Wiggin |
Posted By: wfmurray
Date Posted: 26 Apr 2011 at 3:29pm
| One was on here some time back had double pulley on alternator. |
Posted By: Bee
Date Posted: 27 Apr 2011 at 12:59pm
 ------------- Bob, North Carolina 1949 B |