Farm Equipment - Question 5bolt to 6bolt Hub Conversion

Print Page | Close Window

Question 5bolt to 6bolt Hub Conversion

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=24452
Printed Date: 16 Jun 2024 at 7:17am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Question 5bolt to 6bolt Hub Conversion

Posted By: Zyta
Subject: Question 5bolt to 6bolt Hub Conversion
Date Posted: 21 Jan 2011 at 12:56pm

Anyone know if the hubs off a smaller AC combine will switch over onto the WD-45 front spindles/axles to move you from a 5bolt to a 6bolt hub & Rim.

Replies:

Posted By: Calvin Schmidt
Date Posted: 21 Jan 2011 at 1:10pm

I don't have the answer but the later D-15's and D-17's had 6 bolt hubs.

Maybe a 6 bolt from a D-15 will work. There has been this discussion on here before. If I remember correctly the outer bearing on a 6 bolt hub is larger. You could always take your spindle to Eldale in Elmira and they will fix you up with a 6 bolt hub.

-------------
Nothing is impossible if it is properly financed

Posted By: John WV
Date Posted: 21 Jan 2011 at 1:35pm

small ac combine has brass bushing not bearing in hub

Posted By: Zyta
Date Posted: 21 Jan 2011 at 2:01pm

Calvin, do you have anything apart over there to compare with?

Posted By: Kip-Utah
Date Posted: 21 Jan 2011 at 2:21pm

D17s were made with both 5 & 6 bolt hubs, but I dont know if they used the same spindles if they do, I'm sure a D17 hub would work on a WD45.

-------------
HANSEN'S OLD ORANGE IRON. Showing, Pulling, & Going!!

Posted By: Lester
Date Posted: 21 Jan 2011 at 6:16pm

I have 1959 D-17 with AC pull combine hubs and a195745D with 6bolt WC hubs on.

Posted By: Dave in il
Date Posted: 21 Jan 2011 at 11:14pm

My 58 D17 has 6 bolt hubs from a 190, had to find different outer bearings.

Posted By: allisorange
Date Posted: 22 Jan 2011 at 8:22am

We have 6 bolt hubs off a junked model 100 combine.

John Carlson