Farm Equipment - M Code Gleaner Manifold

Print Page | Close Window

M Code Gleaner Manifold

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=24165
Printed Date: 23 May 2024 at 7:37am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: M Code Gleaner Manifold

Posted By: JonB. in AR
Subject: M Code Gleaner Manifold
Date Posted: 16 Jan 2011 at 9:39am

Hello all, I am in the middle of a Gleaner engine swap going into my 40 model WC. While I was fixing to uncradle the engine I noticed the exhaust manifold has been leaking. The old 201 has a relatively new Vinson replacement manifold. Would it fit on the Gleaner Engine? Thanks for any info. Jon B. Williams, Clarksville AR

Replies:

Posted By: Rick
Date Posted: 16 Jan 2011 at 9:46am

Yes,it'll fit and work just fine. Rick

Posted By: JonB. in AR
Date Posted: 16 Jan 2011 at 9:54am

Thanks, Rick. Just wanted to make sure before did the swap. Thanks

-------------
WD-45,WC,CA,C,B, Oliver 77, Fordson Dexta