WD45 Spin Out Wrench
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=24136
Printed Date: 04 Jun 2024 at 10:28pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: WD45 Spin Out Wrench
Posted By: dannyraddatz
Subject: WD45 Spin Out Wrench
Date Posted: 15 Jan 2011 at 7:02pm
|
I bought a wrench but it had no handle, can some one help me out with what type of steel rod and maybe a picture.
Thanks,
Danny ------------- Danny Raddatz |
Replies:
Posted By: omahagreg
Date Posted: 15 Jan 2011 at 7:36pm
Like this? Found these in the WD toolbox-cleaned them and painted them.  ------------- Greg Kroeker 1950 WD with wide front and Freeman trip loader |
Posted By: AaronSEIA
Date Posted: 15 Jan 2011 at 7:59pm
|
I want to know how loose the eccenterics have to be for that hand wrench to work. I need my impact and/or a 1/2 drive breaker bar to make mine turn. Someday I'm gonna take them off and clean them up nice so something like the correct wrench will work them. Then I'll need to find the correct wrench.
AaronSEIA
|
Posted By: dannyraddatz
Date Posted: 15 Jan 2011 at 8:19pm
|
Greg,
That's the one, how long is the bar? and is the end flattened so it woun't slide all the way threw the wrench?
Danny ------------- Danny Raddatz |
Posted By: omahagreg
Date Posted: 15 Jan 2011 at 8:42pm
|
Aaron, Dad tells me they only worked for a short time, when the tractor was new LOL!Danny, the rod is approximately 1 inch shorter than the wrench, and, yes, the one end is flattened! ------------- Greg Kroeker 1950 WD with wide front and Freeman trip loader |
Posted By: AaronSEIA
Date Posted: 15 Jan 2011 at 9:21pm
|
Thats what I'm thinking. I see them do it on the old videos and it looks like my 3 1/2 year old could run the wrench. Anyone here farm with them new remember moving the wheels as much as they say in the videos?
AaronSEIA
|
Posted By: Dave (NE)
Date Posted: 15 Jan 2011 at 9:47pm
| I still use a set with my '45 to move the wheels in and out a couple of times a year. Move them in for the plow and in the winter with the blade. Move them out in the spring for the planter and cultivator. Everything moves properly. The tractor was always shedded, so that may help. Dave |
Posted By: Don(MO)
Date Posted: 16 Jan 2011 at 1:52pm
|
Danny, I use a tire spoon bar for my bar, they are longer than the right bar and give more leverage. Not just use a plain old piece of round bar like re-bar they are not strong enough and will just bend. I've been there tried that. lol
Don ------------- 3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep. |
Posted By: AaronSEIA
Date Posted: 16 Jan 2011 at 1:55pm
|
I move mine out for the blade (more room for the chains) and in in the summer. Mine has been inside as well, but it takes an impact to get mine to move. I just need to take them off and clean them up good.
AaronSEIA
|
Posted By: Dakota Dave
Date Posted: 16 Jan 2011 at 3:01pm
| My WD45 lasts has been dissasembled and painted I can move with a 1/2 Inch ratchet and socket. the Othe tractor I couldn't move with a 3/4 breaker bar with a 4 ft. cheater. I did manage to sanp one off though. |
Posted By: cwhit
Date Posted: 16 Jan 2011 at 4:12pm
|
Back in the early 70's we had 4 of then,( 2 17's 2 45's ) that we we had to move in and out twice a year. I was only about 10 or 12 when I was tapped to do one of them myself. The onlly thing we used back then was the wheel wrench in the tool box. The biggest deal was catching h#ll for not getting the rear wheels straight. And I mean STRAIGHT ! Looking back I suppose it was just another lesson on doing a job the right way..
|
Posted By: Eldon (WA)
Date Posted: 16 Jan 2011 at 5:26pm
|
I think some of the replacement rims are a little tighter, too. Some tractors there is no way to get all four locked all the way without breaking something. ------------- ALLIS EXPRESS! This year: |
Posted By: Reeseholler
Date Posted: 16 Jan 2011 at 5:55pm
| I have a feeling that's what I'm going to run into with my rim. It's hard to get the hub into the eccentrics so it could be tricky getting them tight. After spraying PB Blaster around the head of the eccentric and after about an hour of turning with a breaker bar, I can turn mine with my fingers and when they're on, with the wheel wrench. |