Farm Equipment - WD Distributor

Print Page | Close Window

WD Distributor

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=23696
Printed Date: 10 Jun 2024 at 9:06am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: WD Distributor

Posted By: Jim-Tea
Subject: WD Distributor
Date Posted: 08 Jan 2011 at 2:32pm

My WD would not start, I found the distributor rotor was not turning. I pulled the distributor and the pin holding the gear was sheared, the grease looked like wheel bearing grease. What should be in there for grease? Thanks for your help.

Jim

Replies:

Posted By: Jim-Tea
Date Posted: 09 Jan 2011 at 10:42am

bump

Posted By: Don(MO)
Date Posted: 09 Jan 2011 at 11:17am

I put just plane old gun grease on the gears there is a plug on the side of the distributor and the gov housing you can put grease in there. Don't over do it.

-------------
3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep.