wd 45 wheel bearing
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=23425
Printed Date: 14 May 2024 at 5:45pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: wd 45 wheel bearing
Posted By: John Ontario
Subject: wd 45 wheel bearing
Date Posted: 04 Jan 2011 at 5:08pm
|
Need new bearing and seal. Local parts guy can't find it listed. Anyone have the parts numbers?
|
Replies:
Posted By: CTuckerNWIL
Date Posted: 04 Jan 2011 at 5:17pm
What bearing? If you have the old one, take it to a bearing supply store like Motion Industries and they will match it. Probly cost half what an Agco bearing would.If your talking front inner seal, the old ones were felt. I don't think they are available anymore but there should be a rubber spring loaded seal to replace it.
-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF
|
Posted By: John Ontario
Date Posted: 04 Jan 2011 at 7:03pm
|
Sorry. Front wheel bearing on a wide front.
Thanks
|
Posted By: CTuckerNWIL
Date Posted: 04 Jan 2011 at 7:41pm
There would be 4 different part numbers for the bearings. Inner cup, inner cone, outer cup and outer cone.
http://shops.godaddy.com/GLEMCO-TRACTOR-PARTS/Allis-Chalmers-Front-Wheel-Bearing-Part-No-70228458/?ISC=GGLFD1 - http://shops.godaddy.com/GLEMCO-TRACTOR-PARTS/Allis-Chalmers-Front-Wheel-Bearing-Part-No-70228458/?ISC=GGLFD1
Here is a discussion on YT including part numbers. http://www.ytmag.com/cgi-bin/viewit.cgi?bd=ac&th=108888 - http://www.ytmag.com/cgi-bin/viewit.cgi?bd=ac&th=108888
Google is a wundermus thing. Just type in "WD45 front wheel bearing", hit the button, and you can find a weeks worth of reading.
-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF
|
Posted By: Chris (swIA)
Date Posted: 04 Jan 2011 at 9:32pm
|
Got replacement front seals(felt) for the front of my D17 from Albert at Dean Ag in Maryville this summer. The 45 and early d17 hubs are the same i think.
|
|