Farm Equipment - m & w sleeve part number

Print Page | Close Window

m & w sleeve part number

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=23289
Printed Date: 16 May 2024 at 12:35pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: m & w sleeve part number

Posted By: alan-nj
Subject: m & w sleeve part number
Date Posted: 02 Jan 2011 at 2:41pm

does anyone know the part number of the m&w sleeve that goes with the m&w ap48 piston? i need to order a new set of rings. i was looking at the hasting's site and they list rings by the sleeve part number, not the piston part number. i won't have the sleeve part number available until i take the engine apart, and i'd like to have the new rings ready when i take it apart. thanks alan

Replies:

Posted By: wi50
Date Posted: 02 Jan 2011 at 2:48pm

I ordered a set from Hastings about a month agoe for some M&W AP48 and AP48 pistons.

It's listed as part 2c7794 for the M&W pistons, gives the quantity and dimension of the rings included in the set.

Hang on to your wallet, the cost was about $140 for a set of rings.

I do not know what O rings to use on the sleves. It's fairley skinney and flat. The Mahle/ Clevelite sleves use a different O ring which is common and easy to order.

Sometimes these sleves are wore to bad to be usefull, bore gauge them, I've seen nice looking M&W sleves that were .018 taper and out of round.

-------------
"see what happens when you have no practical experience doing something...... you end up playing with calculators and looking stupid on the internet"

Posted By: Bruce Nelson
Date Posted: 02 Jan 2011 at 2:58pm

The sleeve set is #SP-48. The M&W ring set is # RS-501