New addition to the herd.
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=211997
Printed Date: 16 Sep 2026 at 12:38pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: New addition to the herd.
Posted By: IBWD MIke
Subject: New addition to the herd.
Date Posted: 16 Aug 2026 at 6:53am
|
Thought you guys might like to see thjis; https://youtu.be/qHYKEIzEApo?si=sd2xhPD3ZjkTl7YV" rel="nofollow - https://youtu.be/qHYKEIzEApo?si=sd2xhPD3ZjkTl7YV
|
Replies:
Posted By: DrAllis
Date Posted: 16 Aug 2026 at 8:04am
| I'm not standing next to it, but is that original paint?? Pretty good looking tractor I'd say. Just like the one my Dad had except for the air conditioning. They are a really nice cab even tho not an Acousta cab. The 38 inch rubber gives you a much more acceptable road gear too. |
Posted By: plummerscarin
Date Posted: 16 Aug 2026 at 8:43am
 Nice! Of all the ones I have, I lean towards the 200 as my favorite. A very nimble machine. |
Posted By: wjohn
Date Posted: 16 Aug 2026 at 8:43am
|
That's a big tractor in my book. It sure looks good! ------------- 1939 B, 1940 B, 1941 WC, 1951 WD, 1952 CA, 1956 WD-45 |
Posted By: Tim NH
Date Posted: 16 Aug 2026 at 5:26pm
|
You did good Mike, that's a nice looking tractor. ------------- 1950 WD 1959 D14 1955 WD45 1976 7000 B 207 |
Posted By: dp7000
Date Posted: 16 Aug 2026 at 10:26pm
| Good looking tractor in my book. At my age any tractor I’m going to spend much time on needs a cab with heat and air. Maybe that might mean I need to retire. |
Posted By: IBWD MIke
Date Posted: 17 Aug 2026 at 6:37am
|
I believe it is original paint. Getting attached to this thing already! Doesn’t show in the video but it has a new seat in it, big plus! This one may just get used on a tractor ride or two. You know those mornings when it’s a bit cool. Or, if I get the air working, those days when it’s sweltry.
|
Posted By: DrAllis
Date Posted: 17 Aug 2026 at 7:55am
| How long did it take for you to like the throttle lever ??? |
Posted By: Ky.Allis
Date Posted: 17 Aug 2026 at 10:11am
| Nice! I can tell by the PTO shield its dual speed. Is it hyd. or manual engage? Year model? Hopefully it's a 74/75 with gated PD control. 2 things I would have to do first: drill rivets out of grill screen, remove screen and clean it up and paint and re-install with brass screws that won't rust. Then straighten muffler and paint with at least 2 coats of some good hi-temp paint. You'll be amazed at how better it will look. Fix the clutch and get the AC working and you will love the old gal. |
Posted By: DrAllis
Date Posted: 17 Aug 2026 at 10:38am
| Back in 1975 I made an adapter to be able to install a 5 inch chrome exhaust pipe on Dad's new 200. The large diameter and 48" long (?) tube makes a 301 sound bigger than it really is !!!!! and fills in the large hole in the hood. |
Posted By: Leadoff
Date Posted: 17 Aug 2026 at 5:01pm
|
IBWD Mike Great looking tractor Congratulations ------------- 1963 D17D Series III. 1965 D15 Series II. 1965 D17 Series IV. 1975 185. 1978 716H. 1979 716H. 1965 780 Harvester/1R&DC. 1957 Model 73 SC 4 Furrow Plow |
Posted By: AC720Man
Date Posted: 17 Aug 2026 at 9:07pm
|
Nice tractor Mike, you’re gonna like it once you get the clutch repaired. Looks to be in great shape. ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: IBWD MIke
Date Posted: 18 Aug 2026 at 5:55am
| Thanks guys! Yes, the controls are easy to like, very easy. Serial No. 5706 which Tractor Data shows as a late 73 model. It’s going to move into the shop at some point in the near future. Then I can start fixing on things. Have to move several others around to get it where I want it for the split. |
Posted By: IBWD MIke
Date Posted: 12 Sep 2026 at 5:35am
The muffler has been taken care of. Grill is waiting, trying to get the combine ready to go now. https://youtube.com/shorts/5sum0FcDUfM?si=NnCfBOTYiZR1DkDX" rel="nofollow - https://youtube.com/shorts/5sum0FcDUfM?si=NnCfBOTYiZR1DkDX Edit; I meant to quote KyAllis.
|
DrAllis wrote: