Farm Equipment - Wd45 hand clutch seal

Print Page | Close Window

Wd45 hand clutch seal

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=211962
Printed Date: 17 Sep 2026 at 5:22pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Wd45 hand clutch seal

Posted By: 500592
Subject: Wd45 hand clutch seal
Date Posted: 12 Aug 2026 at 6:38am

Is it possible to change the seal where the hand clutch lever shaft enters the casting or does that require the frame rail to come off?

Replies:

Posted By: Alberta Phil
Date Posted: 12 Aug 2026 at 9:03am

One of my neighbors just did that and he removed the frame rail.

Posted By: albatros_3
Date Posted: 12 Aug 2026 at 10:21am

I just did mine and I cannot see anyway to do it without taking the frame rail off.

Posted By: 500592
Date Posted: 12 Aug 2026 at 6:36pm

Thanks for the confirmation it will make a good winter project. It is only slowly dropping at the moment

Posted By: DrAllis
Date Posted: 12 Aug 2026 at 6:47pm

Put a good bottle jack right under the PTO box and put slight pressure on it. Remove the right side frame and reinstall.