Farm Equipment - Another CA Pickup Plow Spacer Question

Print Page | Close Window

Another CA Pickup Plow Spacer Question

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=210562
Printed Date: 29 Mar 2026 at 6:01pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Another CA Pickup Plow Spacer Question

Posted By: dfwallis
Subject: Another CA Pickup Plow Spacer Question
Date Posted: 29 Mar 2026 at 12:38pm

The pickup plow manual shows a spacer that goes on top of the rear end of the pull bar (spacer is missing). In the line drawing, it seems to show it side-on as a straight piece of U channel with no cutouts for the through bolt in the sides. However, in the image of the installation earlier in the manual, it appears to show the end view of the U channel as if it would need a cutout in the sides for the through bolt to go through (and presumably keep it from sliding out). Not finding a suitable sized U channel, I'll probably make something.Does anyone know the design/dimensions of this spacer? The max gap is almost exactly 5/16 inch so the web thickness would be 5/16 or less I assume. I could also install it side to side so that the bolt goes through the channel, but that's not how the plow image shows it.

-------------
1952 CA13092