D14 choke decal
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=210543
Printed Date: 27 Mar 2026 at 10:46pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D14 choke decal
Posted By: AC720Man
Subject: D14 choke decal
Date Posted: 27 Mar 2026 at 3:24pm
|
I’m ordering decals from Maple Hunter for my 1959 D14. It doesn’t show a decal for the choke. I sand blasted my side covers and didn’t take a picture first. I can’t remember if there was a decal there? Was there one? ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Replies:
Posted By: BobPaulusCentrOH
Date Posted: 27 Mar 2026 at 4:45pm
|
On my 1959 D14 I have original side covers that has an oval with a D-14 inside. A decal on each side. I believe that is original. I have also seen square D-14 on supposed later models of D-14. Hope that helps. Good Luck, Bob
|
Posted By: AC720Man
Date Posted: 27 Mar 2026 at 7:30pm
|
Thanks Bob, mine is the later 59’ with the D14 on the rear corner of hood. Just thought there would be a choke decal at the lever. ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: jaybmiller
Date Posted: 27 Mar 2026 at 7:49pm
|
side covers ??? really you HAVE side covers !!! I've had four D-14s, never had a side cover.... NO wasp nests either !!! Always figured they were a dealer option...hehehe ------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
Posted By: DSeries4
Date Posted: 27 Mar 2026 at 8:07pm
|
I have 3 D14s all wearing original paint. None of them have a decal for the choke. ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
Posted By: AC720Man
Date Posted: 27 Mar 2026 at 8:19pm
|
Thanks Myron, that’s what I needed to know. My original paint was so faint that I just put it in the blaster and went at it. Just figured there would be a decal there. But now I know. Jay, I’m not sure if the covers had ever been removed. Low hour tractor with apparently no issues behind the covers. All the bolts were there also. ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: DSeries4
Date Posted: 27 Mar 2026 at 8:23pm
Mice absolutely love making nests behind those covers - well hidden and lots of wires to chew on. Most of my side covers are in better shape than the tractors - they got removed from the tractor and hung up in the shed!
------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
AC720Man wrote:Posted By: AC720Man
Date Posted: 27 Mar 2026 at 8:33pm
|
Oddly, Our D15, my D17 never have nest there. Found some stuff in the flywheel occasionally while sitting over the winter, which this D14 had in it also. That’s with the bell housing cover still in place. The wiring also had not been chewed on. Lucky I guess. We do get birds nest in the radiator cowls in the spring. Always check them before we start them. ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |