Wheel weight bolts
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Classifieds
Forum Description: For sale or wanted items
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=210292
Printed Date: 17 Sep 2026 at 11:43pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Wheel weight bolts
Posted By: AC720Man
Subject: Wheel weight bolts
Date Posted: 04 Mar 2026 at 1:48pm
Looking for 70-223565, front wheel weight bolts for a D14. Need 6. If you have one but it’s not for sale please give me the measurements of it, I’m guessing I could use a carriage bolt and grind the side off to fit.
Thanks
Robbie
-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD
|
Replies:
Posted By: PaulB
Date Posted: 04 Mar 2026 at 4:14pm
I used square head bolts and did some "blacksmith" work on them. Heated the head and a bit of bolt up till red and then gave it a good whack on the anvil with a large chunk of metal on the bolt shank.
-------------
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY
|
Posted By: AC720Man
Date Posted: 04 Mar 2026 at 4:51pm
I wish I had one to go by, I do remember the offset of the head. Could also just cut the side of it off but I need to know the size of the bolt and length. Maybe dad’s D15 SII bolt would be the same? I will look it up on Agco parts-book. His weights are on the inside. I think it has the offset as well.
-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD
|
Posted By: AC720Man
Date Posted: 04 Mar 2026 at 8:54pm
D15 is a different bolt so that won’t work.
-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD
|
Posted By: AC720Man
Date Posted: 06 Mar 2026 at 9:25pm
Thanks to MikeZ, he has what I need.
-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD
|
Posted By: Michael Crowe
Date Posted: 07 Mar 2026 at 8:37pm
i have a set of originals. it may be a week before i can get to the farm but ill take some pictures and measurements.
-------------
The 15th Annual Exclusive AC Swap Meet will be held in Boonville, MO, March 6-7, 2026. See the club website for details: http://www.moacclub.com/
|
Posted By: AC720Man
Date Posted: 07 Mar 2026 at 10:30pm
Thanks but I have 6 NOS coming from MikeZ.
-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD
|
|