Farm Equipment - Plow shares for CA plow

Print Page | Close Window

Plow shares for CA plow

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=209864
Printed Date: 21 Mar 2026 at 11:41pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Plow shares for CA plow

Posted By: Bull54CA
Subject: Plow shares for CA plow
Date Posted: 25 Jan 2026 at 8:11pm

Does anyone know where to find shares for my plow. It is pin hitch goes on my CA. I believe its a model 52. Its 12 inch bottoms but maybe I could cut longer ones down. Thanks for any information.

Replies:

Posted By: Mikez
Date Posted: 25 Jan 2026 at 9:41pm

Do you have the old ones. Should be part numbers on back sides of shares, moldboard, shins and landslides. If you can get part numbers on back then can match what bottom you have and find what your looking for.

Posted By: IBWD MIke
Date Posted: 26 Jan 2026 at 6:54am

Mike's right. Need to know what No. bottom you're dealing with. That's the first step.

Posted By: Leon B MO
Date Posted: 26 Jan 2026 at 8:10am

I've got 2 of them. Problem is they're still on the plow. Pin hitch, 2 bottom 12". Plow is in very good original condition. Stored in shed. Would take $100 for the whole plow. I've put a belly mower on the CA and just don't need the plow. East central Mo.
Leon B

-------------
Uncle always said "Fill the back of the shovel and the front will take care of itself".