Farm Equipment - 190 xt crankshaft wear sleeve

Print Page | Close Window

190 xt crankshaft wear sleeve

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=209721
Printed Date: 15 Jan 2026 at 11:39am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 190 xt crankshaft wear sleeve

Posted By: 190xt MN
Subject: 190 xt crankshaft wear sleeve
Date Posted: 15 Jan 2026 at 7:40am

Hello. Quick question. How far should the rear main wear sleeve be pressed onto the flywheel on a 190xt? Just till flush, or till the bevel on the sleeve matches up with the flywheel bevel? It didn’t mention that in my service manual. Thanks in advance for any replies.

Replies:

Posted By: DrAllis
Date Posted: 15 Jan 2026 at 8:24am

Loctite and flush has always worked for me. Pretty hard to get it past flush.

Posted By: 190xt MN
Date Posted: 15 Jan 2026 at 9:27am

That’s where I was at too. Thanks!