All-Crop Parts ?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=209695
Printed Date: 22 Mar 2026 at 12:53am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: All-Crop Parts ?
Posted By: Pointer Hollow Farm
Subject: All-Crop Parts ?
Date Posted: 13 Jan 2026 at 11:45am
|
So where is the best place to get these parts? Is it stuff Agco still has or do I just hope to get lucky and find NOS. I am trying to get seals and maybe bushings. I am sure I will be fine this season, but there are a few openers that I could stand to replace as the bushings seem a little loose. Thanks in advance!  |
Replies:
Posted By: dr p
Date Posted: 13 Jan 2026 at 7:05pm
| Openers are nla |
Posted By: Pointer Hollow Farm
Date Posted: 13 Jan 2026 at 7:56pm
| What about the seals and bushings? |
Posted By: IBWD MIke
Date Posted: 14 Jan 2026 at 6:12am
| If it were me, I'd check with Alex at A&W tractor. Lon might possibly have some stuff? |
Posted By: DrAllis
Date Posted: 14 Jan 2026 at 6:37am
| The long and short of this question is this: Probably little to no chance of any new parts available from anyone. These old discs and plows and whatever are 60 or more years old. A better chance if it was a Deere or Farmall as they were the biggest guns back then. So, whenever you see another implement in the weeds, better look it over for some good used parts for your unit. |
Posted By: Kenny L.
Date Posted: 14 Jan 2026 at 8:15am
|
check and see if the one off of a great plains drill will work, I know the seed tubes will work like I told you. |
Posted By: Mikez
Date Posted: 14 Jan 2026 at 8:17am
| What’s the part numbers |