Farm Equipment - 190 Control Lever removal

Print Page | Close Window

190 Control Lever removal

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=209536
Printed Date: 22 Mar 2026 at 8:12am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 190 Control Lever removal

Posted By: MadCow
Subject: 190 Control Lever removal
Date Posted: 30 Dec 2025 at 4:15pm

Can the pins holding the hydraulic, throttle, and other control levers be removed, in order to swap the levers, with a cab and/or fenders on?

The throttle on mine was welded up and looks gross and a couple of the others need to be straightened. What's the trick to get these levers out?

Replies:

Posted By: DSeries4
Date Posted: 30 Dec 2025 at 8:48pm

With the cab and fenders on? No. I removed mine by pounding the pin from the outside in - took a lot of work, been there for 60 years! Remove the aluminum cover on top and you will access the levers. It is still a very tight fit though. Disconnecting the levers from the rods are hard to do in the space provided.

-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080

Posted By: MadCow
Date Posted: 30 Dec 2025 at 8:58pm

I was hoping you'd have a sweet trick to share. Thanks with! Now I won't spent my days banging my head for no reason