Print Page | Close Window

Hydraulic Lift Allis Chalmers ED40

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=209189
Printed Date: 02 Dec 2025 at 9:59am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Hydraulic Lift Allis Chalmers ED40
Posted By: John426
Subject: Hydraulic Lift Allis Chalmers ED40
Date Posted: 02 Dec 2025 at 8:42am

I am looking for the parts number for the seals of the hydraulic lift of the ED40. It is a non depthomatic

  • For the cylinder
  • And also for the control valve
With the size of each If possible, or a delaer adress

Thanks if you could help me





Replies:
Posted By: DanielW
Date Posted: 02 Dec 2025 at 9:24am
If you're not familiar with the site, I recommend looking through the Agco Parts Books website. They have all the Allis/Agco parts books available for free online viewing. See link below and this pictures taken from the ED40 book. But if it's just the seals you need, any local hydraulic or industrial supply shop worth their salt should be able to measure and cross-reference them.

Good luck with it. I always liked the ED40's. They always seemed like a very solid, robust, ruggedly-built unit. More ruggedly build than the D14's/15's you see more of over here (not that I have any problem with the D14's/15's). Not many ED40's ended up in the US. A few more are here in Canada, and even more ended up over there in Europe. They had a reputation for being a hard starter, which was a complaint about them over here in the Canadian winters. But I remember reading that there are a few ways to retrofit different glow plugs on them which really helps cold starting. If I remember right, glow-plugs from one type of 1980's Nissan diesel are an easy retrofit into the early ED40 heads with the unusual M14 threads. The later ED40's had more common M10 threads, into which glow-plugs from a GMC 6.2 or 6.5 would fit.

Link to Agco Parts Book for the ED40: https://parts.agcocorp.com/us/en/apbsearch?q=agcoallis/9001542b/l&name=ED40+TRACTOR





Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net