Print Page | Close Window

Char-Lynn WD45 Brackets

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=208436
Printed Date: 06 Oct 2025 at 5:27pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Char-Lynn WD45 Brackets
Posted By: Lingle
Subject: Char-Lynn WD45 Brackets
Date Posted: 06 Oct 2025 at 12:28pm
Good day everyone!  I recently purchased a removed from the tractor "complete" Char-Lynn power steering system for my WD45.  unfortunately it is missing 2 brackets and I am hoping someone could provide me some rough measurements so I can make them.  Given they are flat bent parts, should be easy to make. 

the brackets I need to make are the inboard bracket for the torque generator and the pump bracket to front cover on the "passenger side".  I need items 300 and 556 in the attached photo.  its likely easier for me to make them if someone could help me with what they are measurement wise.

uploads/23395/Snap21.png" rel="nofollow - uploads/23395/Snap21.png

Thanks!


-------------
35 and 41 WM crawlers, 49 WD, 53 WD45 wide front, 49 JD A, 52 JD B


Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net