Farm Equipment - WD/WD45 Question

Print Page | Close Window

WD/WD45 Question

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=208166
Printed Date: 13 Sep 2025 at 2:24pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: WD/WD45 Question

Posted By: Dennis J OPKs
Subject: WD/WD45 Question
Date Posted: 13 Sep 2025 at 8:52am

I've only seen this on 2 tractors. One was mine & the other was at a show in Ottawa KS. The right rear corner of the platform was cut out-about a 5- or 6-inch section, smooth cut, not a torch job. I don't have a photo. I immediately replaced the platform, and the old one went to scrap. This was obviously done to gain clearance for some rear implement, mounted or pull type. That's under the seat so it couldn't have been very long. Both of these sightings were in KS which means nothing. So, this question is thrown out there for your answer. Someone must know. Thanks.