Farm Equipment - D14 front wheel weight bolts

Print Page | Close Window

D14 front wheel weight bolts

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=208019
Printed Date: 14 Sep 2025 at 1:17am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D14 front wheel weight bolts

Posted By: Bill B
Subject: D14 front wheel weight bolts
Date Posted: 01 Sep 2025 at 2:10pm

Hello All,
I'm a new member.
I'm looking for bolts for the front wheel weights for my D14.
Can anyone help?
Thanks,
Bill B

Replies:

Posted By: m16ty
Date Posted: 01 Sep 2025 at 8:27pm

I’ve always just used standard carriage bolts from the hardware store.

Posted By: DMac
Date Posted: 01 Sep 2025 at 9:07pm

you can use 1/2” x 4” carriage bolts just grind one side off back to the square of the bolt

Posted By: Dennis J OPKs
Date Posted: 02 Sep 2025 at 3:07pm

If they were that same bolts as for WD's, they are a one/off square headed bolt flush on one side to fit well into the wheel slot. Ground off carriage bolt should work just fine as long as you can get it good & tight.

Posted By: IBWD MIke
Date Posted: 03 Sep 2025 at 4:00am

I have some I made out of flat stock and all thread years ago. They mimic the originals pretty well.

Posted By: Bill B
Date Posted: 09 Sep 2025 at 11:03am

Could you post a picture of one of them. I need 3.
Thanks!

Posted By: IBWD MIke
Date Posted: 10 Sep 2025 at 5:28am

I'll see if I can find some and take a picture.