L2 part needed
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=207571
Printed Date: 27 Jul 2025 at 9:44am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: L2 part needed
Posted By: doug77
Subject: L2 part needed
Date Posted: 26 Jul 2025 at 5:55pm
|
Does anybody know it the electric solenoid in the cab under the fuse box on a L2 is still available from agco. I tried NAPA but with no luck. Any help would be appreciated. thanks
|
Replies:
Posted By: 8070nc
Date Posted: 26 Jul 2025 at 6:38pm
Oreily auto parts has a 80 amp continuous duty solenoid. I dont see why it would not work. Part number 24401-01. Its nomally open and normally closed. Youll just have to make sure you wire it right
-------------
1984 80780
1957 D14
DES 300 with 25000 engine
616 tractor
|
Posted By: ryan(IN)
Date Posted: 26 Jul 2025 at 7:01pm
What is your serial #? They have two different solenoids. I thought they had two different. Part number 71170617 agco has them in the warehouse.
-------------
ryan
1984 8070 FWA,1979 7060,1975 7040,1971 190,1960 D-17D,1957 D-14, 196? D-19G, 1975 5040,1971? 160,1994 R62
|
Posted By: tbran
Date Posted: 26 Jul 2025 at 10:58pm
Yes any Gleaner contimuous duty solenoid will work - two part #'s available.
-------------
When told "it's not the money,it's the principle", remember, it's always the money..
|
Posted By: Lynn Marshall
Date Posted: 27 Jul 2025 at 7:57am
|
I seem to recall that they upgraded the solenoid over the years. Higher amperage, different vendors, or combine serial number changes. I would get the latest one,if possible. It might have had a 100 Amp rating.
|
|