Farm Equipment - A-C 303 etc. Baler knife sharpening

Print Page | Close Window

A-C 303 etc. Baler knife sharpening

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=207552
Printed Date: 27 Jul 2025 at 9:43am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: A-C 303 etc. Baler knife sharpening

Posted By: JimWenigOH
Subject: A-C 303 etc. Baler knife sharpening
Date Posted: 25 Jul 2025 at 1:37pm

The Operator's Manual says "knives may be sharpened". Mine have some chips on them so I removed them to sharpen them. The knife on the ram has plenty of extra material that I can work with in order to remove the chips. The stationary knife which is reversible, when new, only protrudes past the back wall of the feed chamber 1/8" at most. I'm reasoning that the stationary knife at its worst could only be ground down to where it is flush with the rear wall of the feed chamber. Is this correct? Would appreciate some experienced input on this.