6080 Exhaust manifold
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=206803
Printed Date: 21 May 2025 at 1:52pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 6080 Exhaust manifold
Posted By: H Clark
Subject: 6080 Exhaust manifold
Date Posted: 20 May 2025 at 8:18pm
I’m looking for an exhaust manifold for my 6080. I’m told by the local dealer that there are 2 options. One is flat where the turbo mounts and the other is slanted. The slanted is no longer available and of course that is what I have . Does anyone have one or know what it would take to convert to the flat one? Thanks in advance .
-------------
1960 D-12,1948 WC, 1973 160, 1977 175, 1984 6060
|
Replies:
Posted By: DrAllis
Date Posted: 20 May 2025 at 8:33pm
|
You have checked with an AGCO dealer?? 74009771 is the P/N. A model F-2 Gleaner combine engine from about model year 1980 or 81 and newer will be the same. You don't want to even try to convert backwards to the old flat manifold. You'd have to buy many other parts to complete the conversion and the right side hood will not fit without butchering it all up.
|
Posted By: H Clark
Date Posted: 20 May 2025 at 8:54pm
Dr. Allis,
Yes they are an AGCO dealer .
He said there is 2 of the slanted ones in dealer inventory and is supposed to be contacting them .
And thanks for the confirmation on the flat manifold. It looked to me that a lot of parts would be needed and clearance would be an issue.
-------------
1960 D-12,1948 WC, 1973 160, 1977 175, 1984 6060
|
Posted By: DrAllis
Date Posted: 20 May 2025 at 8:56pm
|
The reason it is raised and tilted inward is to make it fit under the hood.
|
Posted By: Mikez
Date Posted: 20 May 2025 at 10:14pm
|
The part number dr listed is still available. We just replaced one on our 6080
|
|