220 fender head lights
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=206776
Printed Date: 22 May 2025 at 1:09am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 220 fender head lights
Posted By: Kevin210
Subject: 220 fender head lights
Date Posted: 18 May 2025 at 7:53pm
|
Would anyone happen to have a couple of fender headlights that has the GE letters in the lens,doing a restore and need 2. I got a couple from a website that had a picture of them with GE in the lens but that wasn't what I got. Thanks. |
Replies:
Posted By: cdreb
Date Posted: 19 May 2025 at 5:11am
|
I will go check, did have a few of them ------------- B,C,5020,D17,(2)-190XT's,220,D21,7060, Agco LT70 |
Posted By: DSeries4
Date Posted: 19 May 2025 at 8:46am
|
NAPA can cross reference the number. Replace all 4 so they match. ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
Posted By: JC-WI
Date Posted: 19 May 2025 at 3:44pm
|
If you have a light with the triangle in the middle of the lense and has a G in the middle of the triangle, that is a GUIDE light... A-C used the Guide light assemblies in the productions of their tractors. Below are a set of lights on a 170  First light is a 4410 back-up light produced by Guide, lots of fluting in the glass.Was also used as a rear work light. Second light is a GE H7610 halogen 50 watt. If you use these lights, I suggest to either put them on a seperate toggle switch or control them thru relays from the light switch. I smoked a good light switch because I had 3 Halogens on the switch. I put in a toggle switch for them and that has worked very good for me. Third light looks original to the tractor, It is a Guide 4411 35 watt 'utility'. Dealer parts book calls it 'Road headlight', part number 230232 . Forth light surprised me when taking the light out, It turned out to be a GE 35 watt rear tail light/ red light #4409 4tractor6. Parts book labels the sealed beam as #235583 As for the field/work light, think the number on that was 4406. Allis had a part number of 239804 for the sealed beam field light. I would put the larger fluted lights in instead of the multiples, just seamed brighter to me. Years ago I use to have a list of manufactures and number to identify what light would cross over but can't find that list anymore.
------------- He who says there is no evil has already deceived himself The truth is the truth, sugar coated or not. Trawler II says, "Remember that." |
Posted By: Kevin210
Date Posted: 19 May 2025 at 6:53pm
We are pretty sure these have the number 4406 on them as well.   
|
Posted By: Kevin210
Date Posted: 19 May 2025 at 6:57pm
| This what I have and want 2 of the same. |
Posted By: PaulB
Date Posted: 19 May 2025 at 7:15pm
|
I have some NIB GE 4411 lights and a few of then loose. ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Posted By: Kevin210
Date Posted: 21 May 2025 at 8:18pm
|
I'll let the owner know and see what they want to do. Do they have the GE in the middle of the lens. |