Farm Equipment - Looking for 71506603 TIRE (4 x 16)

Print Page | Close Window

Looking for 71506603 TIRE (4 x 16)

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=206524
Printed Date: 19 Jul 2025 at 8:43pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Looking for 71506603 TIRE (4 x 16)

Posted By: Joe(OH)
Subject: Looking for 71506603 TIRE (4 x 16)
Date Posted: 01 May 2025 at 7:34am

Looking for closing disk tires for a 385 planter. Has anyone come up with a solution? My dealer said AGCO and Landoll have it listed as no longer available.

-------------
Life is simpler when you plow around the stump.

Replies:

Posted By: tbran
Date Posted: 01 May 2025 at 8:14am

Try Sloan 4X16 Part #

109017 https://www.sloanex.com/c05yo31a4d-45x16guagewheel.html" rel="nofollow - https://www.sloanex.com/c05yo31a4d-45x16guagewheel.html

-------------
When told "it's not the money,it's the principle", remember, it's always the money..

Posted By: orangereborn
Date Posted: 01 May 2025 at 9:24am

Joe...I am parting out a couple of Deutz Allis 385's...And the actual Sloan one that I seen are a different profile and not sure if they will attach...I have visited the Shoup store and they can't match it either. I talked to Landoll last week and and they passed me on to a couple of dealers who confessed that they have also moved on....Dale

Posted By: Joe(OH)
Date Posted: 08 May 2025 at 7:58am

I may have found a solution. I made a video about it. http://youtu.be/WFOPasleWsg" rel="nofollow - http://youtu.be/WFOPasleWsg

-------------
Life is simpler when you plow around the stump.

Posted By: bleeds orange
Date Posted: 08 May 2025 at 9:10am

👍

Posted By: Dave (Mid-MI)
Date Posted: 10 May 2025 at 8:43pm

I changed mine out last week for the same JD tires that Joe used. I got used ones from a friend that changed out all the tires on his air seeder. I used a die grinder and carbide burr to cut channels inside the tires (six on each side) to accommodate the ridges on the wheel halves.