Bought stanhoist trip loader owner before didnt us
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=204841
Printed Date: 07 May 2025 at 4:21am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Bought stanhoist trip loader owner before didnt us
Posted By: Bluetick58
Subject: Bought stanhoist trip loader owner before didnt us
Date Posted: 06 Jan 2025 at 11:30am
| Owner before didnt use holes in d17 drilled more 9 inches back makes it hard to get on tractor why wouldnt he use original holes already drilled mount lines up and makes it easier to enter and get off would there be reason he moved it back? |
Replies:
Posted By: Gary
Date Posted: 06 Jan 2025 at 12:04pm
|
Do you mean he drilled new holes 9" back from the originals up front beside the Engine Block. If he was able to do that and the Boom still clears the Rad Shroud, it must be an extra long Boom. An extra long Boom would add a considerable amount of weight to the Front Axle. G |
Posted By: Bluetick58
Date Posted: 06 Jan 2025 at 12:20pm
|
Yes he drilled 9 " back from original ones makes it very difficult to get on or off just wondered why? |
Posted By: DrAllis
Date Posted: 06 Jan 2025 at 1:32pm
| The closer the loader is to the front of the tractor, the more weight it can lift before the rear wheels leave the ground. The downside is you can't reach over a fence or the side of a manure spreader as far. |
Posted By: DSeries4
Date Posted: 06 Jan 2025 at 1:54pm
You would have to ask the previous owner about that. Some people do pretty strange things... ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
Bluetick58 wrote:Posted By: Bluetick58
Date Posted: 06 Jan 2025 at 1:59pm
| Don't know who he was bought from junker |