Make lower lift arms
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=204807
Printed Date: 03 May 2025 at 12:40pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Make lower lift arms
Posted By: TimmyG185
Subject: Make lower lift arms
Date Posted: 03 Jan 2025 at 8:22pm
|
Hey guys! So I’m gonna make some lower lift arms for my 185 tomorrow as I’m having a hard time finding some here in Canada without paying an arm and a leg for shipping. They won’t be adjustable so I’m just looking for a measurement from eye to eye to determine my bar length. Thanks! |
Replies:
Posted By: TimmyG185
Date Posted: 03 Jan 2025 at 10:29pm
|
Posted By: DrAllis
Date Posted: 04 Jan 2025 at 6:03am
| My tape measure says about 4 inches center to center by that picture. |
Posted By: DSeries4
Date Posted: 04 Jan 2025 at 8:35am
|
Fawcett's (now All States) should have plenty of those available. Those were used on many other models as well. ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
Posted By: TimmyG185
Date Posted: 04 Jan 2025 at 11:34am
| Dr. Allis, might need a bigger monitor I think the scale is off haha. Ya unless it’s local to me shipping is just atrocious due to the weight and I’ve called most local yards here in BC and Alberta but someone has sent me some measurements |