Farm Equipment - 37 wc dowel in rear hub

Print Page | Close Window

37 wc dowel in rear hub

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=201041
Printed Date: 22 May 2024 at 6:00am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 37 wc dowel in rear hub

Posted By: HudCo
Subject: 37 wc dowel in rear hub
Date Posted: 24 Apr 2024 at 10:14pm

my 37 wc has one dowel in the left hud and five studs . does the dowel pull straight out or thread out ? or deas the hub have to be removed to get it out from the inside ?

Replies:

Posted By: Gary
Date Posted: 25 Apr 2024 at 6:28pm

Parts Catalog doesn't illustrate the Dowell as having threads, appears to be a press fit in to a blind hole.

G

Posted By: Kip-Utah
Date Posted: 25 Apr 2024 at 7:36pm

I’m pretty sure that it screws out. We never tried to remove the studs from our ‘37…but our ‘38, ‘39, & ‘41 WCs , as well as our ‘39 RC all have tapped threaded holes in all six holes. I’d try a small pipe wrench or one of the outside “gripper” type stud extractors.

Posted By: HudCo
Date Posted: 25 Apr 2024 at 10:43pm

my right side has six studs itryed screwing it out had to use the rose bud on it i turned it several rounds it dont screw out i will weld a nut on it and hook it to my 50lb. slide hammer on it

Posted By: Mikez
Date Posted: 26 Apr 2024 at 7:07am

What’s the part number. I’ll see if we have it and check it out

Posted By: Fred in Pa
Date Posted: 26 Apr 2024 at 8:51am

Curious as to why you what to remove it .

-------------
He who dies with the most toys is,
nonetheless ,still dead.
If all else fails ,Read all that is PRINTED.