Farm Equipment - 8010 Hydraulic Pump Leak

Print Page | Close Window

8010 Hydraulic Pump Leak

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=200706
Printed Date: 16 Jun 2024 at 9:36am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 8010 Hydraulic Pump Leak

Posted By: automaticdave
Subject: 8010 Hydraulic Pump Leak
Date Posted: 04 Apr 2024 at 7:36am

I,ve sprayed the pump down a couple times while I have been working on the engine and its leaking between the range trans and the adapter plate (# 10 in the AGCO parts book) and also between the adapter plate & the flow divider housing # 25, could some one tell me what gaskets and or seals I need to fix this ? Thanks Dave

Replies:

Posted By: Lynn Marshall
Date Posted: 04 Apr 2024 at 7:28pm

You will need 2 of #70269665, 1 of #70929728, 1 of # 70261382, 1 of #70924921, 1 of #70265383 and if it's a power director tractor, 1 of a #70269727. They do offer a seal kit #70271888 that has most everything to overhaul the dual pump. It may be quite expensive since it has the wear plates included. You should also probably replace the shaft seal while there. 1 of #70265398 and 1 of # 70923573.

Posted By: Ron(AB)
Date Posted: 04 Apr 2024 at 10:31pm

The complete seal kit is not available...The other components are though.

-------------
405, 7000, 7050, 8050, 8070, L3, 2300 & 2600 disk

Posted By: automaticdave
Date Posted: 05 Apr 2024 at 7:18am

Thanks guys, I wanted to be sure I could get parts before I pulled pump, Dave