Classifieds - carburetor

Print Page | Close Window

carburetor

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Classifieds
Forum Description: For sale or wanted items
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=200679
Printed Date: 01 May 2025 at 10:56am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: carburetor

Posted By: mhbier
Subject: carburetor
Date Posted: 02 Apr 2024 at 5:35pm

I rebuilt the carb on my d14 and now it won't idle lower than about 700. Any idea what is going on? The idle screw doesn't seem to make a difference.

Replies:

Posted By: steve(ill)
Date Posted: 02 Apr 2024 at 5:47pm

does the carburetor arm come all the way back AGAINST the screw... or is the arm dragging the side of the engine block ?

Did you bottom out the adjusting screws and back out 1.5 turns to start ?

-------------
Like them all, but love the "B"s.

Posted By: DrAllis
Date Posted: 02 Apr 2024 at 5:48pm

Throttle plate disc not centered in the bore if what you say is true. Loosen low idle speed screw three turns, loosen two screws holding the throttle plate, force the throttle closed to center the disc and re-tighten the screws.