185 DRAWER BAR CLEVIS
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=200660
Printed Date: 23 May 2024 at 1:05pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 185 DRAWER BAR CLEVIS
Posted By: SIMPLICITY
Subject: 185 DRAWER BAR CLEVIS
Date Posted: 01 Apr 2024 at 7:22pm
|
DID 185'S HAVE THE ABILITY TO HAVE A CLEVIS DRAWER BAR , IF SO WOULD ANYBODY HAVE THE BOLT ON HALF ? |
Replies:
Posted By: steve(ill)
Date Posted: 01 Apr 2024 at 7:35pm
does your drawbar have the two bolt holes ? I would guess you could have that part made ( welded from 3 pieces) if no one has one. ------------- Like them all, but love the "B"s. |
Posted By: SteveM C/IL
Date Posted: 01 Apr 2024 at 9:17pm
| It's called a hammer strap. They seem to be worth their weight in gold. |
Posted By: Lars(wi)
Date Posted: 01 Apr 2024 at 9:42pm
|
Years ago we needed to put one of those on the drawbar of an IH 1086, for pulling a 17 ft field cultivator. The strange thing this, that tractor did a decent job pulling that field cultivator, but was not worth a crap pulling a 5-18 moldboard plow. Our IH 856’s would run circles around that 1086 on the plow, but didn’t do as well on that cultivator, same size drive tires(18.4-38), we never could figure out why. ------------- I tried to follow the science, but it was not there. I then followed the money, and that’s where I found the science. |
Posted By: Gary
Date Posted: 02 Apr 2024 at 4:34am
|
One like this Draw Bar? G https://www.machinerypete.com/details/40-99-hp/allis-chalmers/185/21331471" rel="nofollow - https://www.machinerypete.com/details/40-99-hp/allis-chalmers/185/21331471 Link to a 185 Parts Tractor https://www.machinerypete.com/details/40-99-hp/allis-chalmers/185/21174864" rel="nofollow - https://www.machinerypete.com/details/40-99-hp/allis-chalmers/185/21174864 |
Posted By: IBWD MIke
Date Posted: 02 Apr 2024 at 9:51am
|
SteveM C/IL wrote: