Snap couple equipment tongue length
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=200412
Printed Date: 15 May 2024 at 12:38pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Snap couple equipment tongue length
Posted By: allischalmerguy
Subject: Snap couple equipment tongue length
Date Posted: 19 Mar 2024 at 10:30pm
|
On Snap coupler equipment ...are all the tongues with the snap coupler loop on them the same length? Or does some fit the D series and not WD series or vice versa? Thanks ------------- It is great being a disciple of Jesus! 1950 WD, 1957 D17...retired in Iowa, |
Replies:
Posted By: DiyDave
Date Posted: 20 Mar 2024 at 4:42am
I think there are 3 lengths, IIRR. Shortest to longest, B/C/CA then WD/WD45, then D Series. If I'm wrong, someone will chime in... ------------- Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need! |
Posted By: PaulB
Date Posted: 20 Mar 2024 at 6:57am
|
The WD/WD45 and Large D tractors use the same length pull bars, However the D series implements need longer lift links to avoid contact with the bottom of the Trans/Lift housing. The B,CA, D10/12 implement are completely interchangeable between all 4 tractors. ------------- If it was fun to pull in LOW gear, I could have a John Deere. If you can't make it GO... make it SHINY |
Posted By: allischalmerguy
Date Posted: 20 Mar 2024 at 7:49pm
|
Thank you!! ------------- It is great being a disciple of Jesus! 1950 WD, 1957 D17...retired in Iowa, |