One Sixty shifter boot
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=200355
Printed Date: 16 Jun 2024 at 9:32am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: One Sixty shifter boot
Posted By: rms61moparman(Ky)
Subject: One Sixty shifter boot
Date Posted: 16 Mar 2024 at 11:22pm
|
Can anyone point me in the right direction for the shifter boot for a One Sixty Allis? I can't seem to find one anywhere. Mike
|
Replies:
Posted By: IBWD MIke
Date Posted: 17 Mar 2024 at 6:28am
|
Have you checked with AGCO? This reminds me, need to order one for the 6080. |
Posted By: ryan(IN)
Date Posted: 17 Mar 2024 at 7:51am
|
I’ll have to double check. Agco had them last year. Not cheap but better than getting water in the transmission ------------- ryan 1984 8070 FWA,1979 7060,1975 7040,1971 190,1960 D-17D,1957 D-14, 196? D-19G, 1975 5040,1971? 160,1994 R62 |
Posted By: rms61moparman(Ky)
Date Posted: 17 Mar 2024 at 8:31am
|
I looked on the website but couldn't find anything close. Mike
|
Posted By: ranger43
Date Posted: 17 Mar 2024 at 8:32am
| I just got one for my 210. Agco dealer had in stock. |
Posted By: ryan(IN)
Date Posted: 17 Mar 2024 at 8:45am
------------- ryan 1984 8070 FWA,1979 7060,1975 7040,1971 190,1960 D-17D,1957 D-14, 196? D-19G, 1975 5040,1971? 160,1994 R62 |
ranger43 wrote:Posted By: AcFordHawk
Date Posted: 17 Mar 2024 at 10:55am
|
Check on Tractorhouse. See there are some listings for the part # - 72072519. Probably need to call to verify stock on hand. One listing from Lindstrom shows 40 on hand. ------------- IB (restoring), MF GC1705, MF 2705E |
Posted By: rms61moparman(Ky)
Date Posted: 18 Mar 2024 at 4:04pm
|
I e-mailed Linstrom and although they didn't have it, they sent me a list of dealers who had it listed in their inventory. (sure wish I could get connected to that gateway) Luckily, the dealer right here in Columbia, Ky. had one and it is now on the way!!! Lightened my wallet CONSIDERABLY, but as stated above, still better than a transmission and hydraulics full of water. Thank you all for your help with this issue! Mike
|
Posted By: rms61moparman(Ky)
Date Posted: 19 Mar 2024 at 5:30pm
|
I'll say one thing for the people at AGREVOLUTION LLC, they are on the ball with their parts service. I ordered this boot on 3-18-24 at about 10:00am, and it was on my door by 3:00pm today 3-19-24!!! That fact alone will make me try to do business with them again. I have lots of Allis stuff needing parts. Mike
|
Posted By: IBWD MIke
Date Posted: 20 Mar 2024 at 8:48am
|
Good to hear you got one. On a similar note I called the Farm Store and talked to ReedE yesterday. They had a boot for the 6080 in stock. It's here now just waiting on me to get it put on.
|
Posted By: IBWD MIke
Date Posted: 21 Mar 2024 at 8:55am
|
I'll post this here as opposed to starting a new thread. Had a little time yesterday afternoon before heading to work. Worked on D-17-1 a little with mixed results. Looking for a change of pace, let's change that shifter boot on the 6080. Pretty simple job, 6 screws and 2 knobs to remove. I put a drop of 'low strength' loctite on the knob threads as the gear shifter likes to get loose. Anyway, took a couple pictures, before/after.   |
Posted By: plummerscarin
Date Posted: 21 Mar 2024 at 11:42am
 Looks good!
|
Posted By: IBWD MIke
Date Posted: 22 Mar 2024 at 9:54am
| Thanks. |
Posted By: GSTROM99
Date Posted: 22 Mar 2024 at 10:14am
|
You should've said "after/before" pics. I spent a minute looking at the first ("before") pic, thinking that didn't look too bad at all. Then I saw the second pic...  Nice job. I think my D-17 needs one too, but it doesn't spend time in the rain.
|
Posted By: rms61moparman(Ky)
Date Posted: 22 Mar 2024 at 10:33am
|
They are cheap and easy for a D-17. Mike
|
Posted By: GSTROM99
Date Posted: 22 Mar 2024 at 4:00pm
|
My local AGCO dealer (10 miles away) had the D-17 shift boot in stock. Exact replacement - even has the two X's. Hardest part was getting the knob pulled off. |
Posted By: AC720Man
Date Posted: 22 Mar 2024 at 10:02pm
|
Brenda at SLI has them, they are expensive! If I remember correctly from last year $95. I took slip joint pliers and bent my shift gate tabs up some to prevent it from tearing the new boot. That really helps. Just my 2 cents ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: rms61moparman(Ky)
Date Posted: 22 Mar 2024 at 11:45pm
I'm thinking about making a cover for the boot out of an old inner tube. I don't want the U/V rays getting to that expensive little rascal! Mike
|
Posted By: IBWD MIke
Date Posted: 23 Mar 2024 at 7:18am
|
Posted By: eireog68
Date Posted: 15 Jun 2024 at 3:24pm
| i need one also did you get one and if so where and how much? |
Posted By: rms61moparman(Ky)
Date Posted: 16 Jun 2024 at 6:26am
|
I located one from the Agco dealer in Columbia Ky. With shipping, it was around 100 bucks. Yes, it is outrageous, but cheaper than a transmission oil change these days. Mike
|