Farm Equipment - 2300 disc axle

Print Page | Close Window

2300 disc axle

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=199803
Printed Date: 24 Aug 2025 at 2:42am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 2300 disc axle

Posted By: Pete b
Subject: 2300 disc axle
Date Posted: 13 Feb 2024 at 2:06pm

Does anyone know where I can get a,axle for my 2300 it's a hex shaft 1/1/8×81 inches mine shaped in have had it welded a few times.

Replies:

Posted By: 8070nc
Date Posted: 13 Feb 2024 at 5:59pm

https://www.hclmachineworks.com/disc-p" rel="nofollow - https://www.hclmachineworks.com/disc-p

-------------
1984 80780
1957 D14
DES 300 with 25000 engine
616 tractor

Posted By: Mikez
Date Posted: 13 Feb 2024 at 5:59pm

Is your disk 15’ wide

Posted By: 8070nc
Date Posted: 13 Feb 2024 at 6:02pm

I just tried the link. It worked for me. Havent bought anything from them but it looks like a straight up outfit
Hope it helps

-------------
1984 80780
1957 D14
DES 300 with 25000 engine
616 tractor

Posted By: Pete b
Date Posted: 13 Feb 2024 at 6:39pm

18ft

Posted By: Pete b
Date Posted: 13 Feb 2024 at 6:40pm

Ok I'll look thanks

Posted By: 1963D17
Date Posted: 13 Feb 2024 at 10:54pm

If your referring to the arbor bolt that goes thru the blades, check Schoup. They sell arbor bolts.

Posted By: Pete b
Date Posted: 14 Feb 2024 at 6:35am

Ok thank you

Posted By: Ray54
Date Posted: 14 Feb 2024 at 2:28pm

I don't know the company but if they are for real, which I think they are, this is the busiest week of the year for them. The biggest west coast equipment show is this week so only the lowest person will be in the store this week.

Posted By: 1963D17
Date Posted: 14 Feb 2024 at 3:04pm

I grabbed my Schoup catalog. A 79.4" long shaft is part number SH794 and is 112.09. A 81.4" is SH814 and is 112.69

Posted By: Pete b
Date Posted: 15 Feb 2024 at 7:14am

Ok thank you I will give them a call