Farm Equipment - 620 V-ripper

Print Page | Close Window

620 V-ripper

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=198474
Printed Date: 09 May 2025 at 1:02pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 620 V-ripper

Posted By: SilverShoes
Subject: 620 V-ripper
Date Posted: 30 Nov 2023 at 12:21pm

I have a couple 3 point mounted 7 shank 620 Allis Chalmers V-rippers and cannot find any literature or manuals on these. Would anyone have leads to where to find info

Replies:

Posted By: DiyDave
Date Posted: 30 Nov 2023 at 4:50pm

Look in Norm Swinford's book, Allis Chalmers Farm Equipment 1914-1985. Has a paragraph on chisel plows. See also, Jeoffroy Chisel (Amarillo, Tx) plows as they made them for AC...

-------------
Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need!

Posted By: MikeKroupa
Date Posted: 30 Nov 2023 at 8:39pm

There are several of the Allis-Chalmers "Deep Tillage Implements" sales brochures on Ebay. All of these implements were manufactured at the Oxnard, California facility. The early v-rippers were labled 9v-chisel, 12v-subsoiler, latter they became the 620 chisel, 630 and 640 subsoilers. Hth, Mike