500 loader replacement cylinders
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=198107
Printed Date: 03 Nov 2025 at 10:19pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 500 loader replacement cylinders
Posted By: structures
Subject: 500 loader replacement cylinders
Date Posted: 07 Nov 2023 at 8:26am
|
Has anybody ever bought off the shelf replacement cylinders for a 500 loader?Is there something that will pin in without modifying the frame? I am looking at a 500 loader but the lift cylinders are gone. ------------- Robert http://www.allischalmers.com/forum/forum_posts.asp?TID=82702&KW=structures&title=structures-1964-allis-d15-series-ii" rel="nofollow - 1964 D15 Series II |
Replies:
Posted By: steve(ill)
Date Posted: 07 Nov 2023 at 5:42pm
|
get the diameter and length you need and take your pick... https://northernhydraulics.net/catalog/loader-hydraulic-cylinders-489-1.html" rel="nofollow - https://northernhydraulics.net/catalog/loader-hydraulic-cylinders-489-1.html ------------- Like them all, but love the "B"s. |
Posted By: steve(ill)
Date Posted: 07 Nov 2023 at 5:47pm
|
https://www.allischalmers.com/forum/500-loader-lift-and-tilt-seal-replacement_topic193219_page2.html
one of the posts on above link... see sizes below... https://www.magisterhyd.com/product/2inch-bore-x-36inch-stroke-cross-tube-hydraulic-cylinder/  ------------- Like them all, but love the "B"s. |
Posted By: steve(ill)
Date Posted: 07 Nov 2023 at 5:55pm
|
https://www.magisterhyd.com/product/2inch-bore-x-36inch-stroke-cross-tube-hydraulic-cylinder/" rel="nofollow - https://www.magisterhyd.com/product/2inch-bore-x-36inch-stroke-cross-tube-hydraulic-cylinder/ ------------- Like them all, but love the "B"s. |
Posted By: orangereborn
Date Posted: 10 Nov 2023 at 12:38am
|
Posted By: calico190xt68
Date Posted: 13 Nov 2023 at 3:01pm
|
I want to also report that I did replace the tilt cylinders and used these Magister cylinders. I used the 2 inch by 24 inch cylinder for the tilts and 2 inch x 36 inch on the lift cylinders. On the rod end of the tilts, I actually had to shave off about 1/8 inch on both sides to get the cylinder to fit into the slot. I used a reciprocating saw and it cut easy. Very happy with the results so far. Have moved quite a few things with my 500 loader since installing and no issues. The price was around $221 and I had to do a back order of a few weeks. With fittings, I sunk about $900 into replacing all four cylinders. It would have cost 2 or 3 times that if I were to fix my original cylinders. I am holding onto the original 500 loader cylinders for now in case I want to make my 190 completely original someday. ------------- 80 7010, 80 7020. 67 190XTD Series I w/500 Loader, AC 2000 Plow, Member Indiana A-C Partners, Member TAC |
Posted By: structures
Date Posted: 14 Nov 2023 at 9:03am
|
Thank you Gents. ------------- Robert http://www.allischalmers.com/forum/forum_posts.asp?TID=82702&KW=structures&title=structures-1964-allis-d15-series-ii" rel="nofollow - 1964 D15 Series II |