Farm Equipment - 7000 pusher bolts

Print Page | Close Window

7000 pusher bolts

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=197847
Printed Date: 08 May 2025 at 12:16pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 7000 pusher bolts

Posted By: Mrgoodwrench
Subject: 7000 pusher bolts
Date Posted: 23 Oct 2023 at 12:21pm

i need a set of pusher bolts for a 7000. I figure with a d-19, 3-190's and 2-700's around i should just get a set to keep. does anyone have any experience with the ones being sold through some tractor parts places or on ebay? i can get them at sandy lake for $100 a bolt. the ones on ebay for example are $40 a bolt but look to be cut from regular bolts. others look to be fully machined from stock and are $170 a set. but I certainly don't want to but complete junk but considering I've never really had to use them I don't really want to spend $300 for them to sit in the toolbox. I might be interested in a used set if anyone is selling.

-------------
There are 3 ways to do job GOOD, FAST, CHEAP. YOU MAY CHOOSE 2. If its FAST & CHEAP it won't be GOOD, if it's GOOD & CHEAP it won't be FAST, and if its GOOD & FAST it won't be CHEAP!!!!

Replies:

Posted By: Model 70
Date Posted: 23 Oct 2023 at 12:28pm

Just bought a set from A&W tractor, they worked great on my D19

Posted By: 8070nc
Date Posted: 23 Oct 2023 at 2:07pm

Just my 2 cents here
Id get a set from agco
If those bolts arent the right temper and start galling in the wedge it could turn a simple job into a nihgtmare

-------------
1984 80780
1957 D14
DES 300 with 25000 engine
616 tractor

Posted By: Mrgoodwrench
Date Posted: 23 Oct 2023 at 3:12pm

That's not a bad two cents. I was kind of thinking that way after looking at the after market ones.

-------------
There are 3 ways to do job GOOD, FAST, CHEAP. YOU MAY CHOOSE 2. If its FAST & CHEAP it won't be GOOD, if it's GOOD & CHEAP it won't be FAST, and if its GOOD & FAST it won't be CHEAP!!!!

Posted By: Alvin M
Date Posted: 23 Oct 2023 at 3:15pm

AGCO Part # is 70235674 At 82.17 each plus shipping

Posted By: Leon B MO
Date Posted: 23 Oct 2023 at 5:00pm

And to think Allis Chalmers gave a set away with each brand new tractor I've got a set from a 200 and an 8050 bought new in 74 and 85.
Leon B Mo

-------------
Uncle always said "Fill the back of the shovel and the front will take care of itself".

Posted By: sparky
Date Posted: 23 Oct 2023 at 5:24pm

How many bolts make a set?

-------------
It's the color tractor my grandpa had!

Posted By: DougG
Date Posted: 23 Oct 2023 at 5:58pm

Posted By: sparky
Date Posted: 23 Oct 2023 at 6:37pm

Okay thanks

-------------
It's the color tractor my grandpa had!

Posted By: LRWSPWI
Date Posted: 23 Oct 2023 at 6:43pm

I built my own for my 200 out of the proper size grade 8 bolts. The wedges were really stuck in the wheel centers, but after a bunch of WD 40 (patience), and some tapping around the centers and putting more pressure on the push bolts every now and then they eventually broke loose.

Posted By: SteveM C/IL
Date Posted: 23 Oct 2023 at 7:09pm

Don't forget the "trick"....tire jacked off the floor,keyway on top,jackscrews torqued up and BFH applied to end of axle.

Posted By: im4racin
Date Posted: 23 Oct 2023 at 9:29pm

Contact Lynn marshal. He had some for sale. Look back in the classifieds…he had a post there

Posted By: KJCHRIS
Date Posted: 23 Oct 2023 at 11:29pm

I got a set from an online auction a couple years ago. They were only 1/2 hour drive away.

Talked to the guy before bidding, he'd got them new @ AC Dlr to move in wheels going from 38" to 30" rows on his 190XT and a neighbor used them to do same thing.

-------------
AC 200, CAH, AC185D bareback, AC 180D bareback, D17 III, WF. D17 Blackbar grill, NF. D15 SFW. Case 1175 CAH, Bobcat 543B,

Posted By: only AC orange
Date Posted: 24 Oct 2023 at 7:29am

I've made a set out of grade 8, 3/4" bolts - machined end to fit in hub. Have used several times with '0" problems. Just used on D-19 last week.