Farm Equipment - D19 rim options

Print Page | Close Window

D19 rim options

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=195782
Printed Date: 20 Jun 2025 at 2:09pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D19 rim options

Posted By: CW2 Ryno
Subject: D19 rim options
Date Posted: 20 Jun 2023 at 7:35pm

Aquired a D19 over the weekend that needs some attention, both rear rims are shot. What options are out there for alternate mounting to use a non spin out rim ?

Replies:

Posted By: DrAllis
Date Posted: 20 Jun 2023 at 9:54pm

D-19's came with 15.5 x 38 or 16.9 x 34/18.4 x 34 rear tires. All three could be power shift or non-spin out wheels. Changing from power shift to non-spin outs or vice versa only takes all the hardware. The cast wheel center remains the same. There are thousands of D-19/190/190XT/200 or 7000 and D-21 tractors in salvage yards to get your parts.

Posted By: CW2 Ryno
Date Posted: 20 Jun 2023 at 10:30pm

Thank you!

Posted By: DrAllis
Date Posted: 21 Jun 2023 at 5:29am

Just to make sure you don't mis-understand....there is a 34 inch cast center and a 38 inch cast center. Changing from power shift to non-power shift is only a hardware change. You cannot put a 38 inch rim on a 34 inch center and vice versa.

Posted By: CW2 Ryno
Date Posted: 21 Jun 2023 at 11:19am

Current size is 18.4-34, I’ll double check dimensions before committing

Posted By: steve(ill)
Date Posted: 21 Jun 2023 at 11:49am

some discussion on size... and step up rims...

https://www.allischalmers.com/forum/200-on-18-4-x-34-to-18-4-x-38_topic182410.html" rel="nofollow - https://www.allischalmers.com/forum/200-on-18-4-x-34-to-18-4-x-38_topic182410.html

-------------
Like them all, but love the "B"s.

Posted By: rtwfarm
Date Posted: 21 Jun 2023 at 2:33pm

Got what you need. 402-469-1738

Posted By: CW2 Ryno
Date Posted: 21 Jun 2023 at 6:23pm

Thanks all!