Help wanted from HD11 owner
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=19507
Printed Date: 19 Jul 2025 at 12:14pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Help wanted from HD11 owner
Posted By: sandylakeimplement
Subject: Help wanted from HD11 owner
Date Posted: 16 Oct 2010 at 8:10am
|
We are replacing the dual pump that supplies steering clutch pressure and lube flow. We would like someone familiar with them to tell us where the 2 sumps are filled/checked and if the lube circuit has a filter/strainer. These machines are out of our comfort zone & we want to make sure we cover all the bases. If you can help please give us a call toll free 888-252-0656. Many thanks, S>L>I
------------- Sandy Lake Implement Sandy Lake, PA 724-376-2489 www.sandylakeimp.com FIND US ON FACEBOOK |
Replies:
Posted By: gemdozer
Date Posted: 16 Oct 2010 at 2:51pm
| The oil tank is is near the spring and you can refill the tank on left side motor and the dip stick is on right side motor |
Posted By: steve aust
Date Posted: 18 Oct 2010 at 3:05am
| There is a strainer at the bottom of the tank outlet , also some models vary ,If it is power shift (EP MODEL) still has pumps but takes oil from transmission ?and has two oil filters above fuel pump and a strainer in a large filter which sits housing above thestarter motor . If it is (EC OR E MODEL) should have a tank in front of the spring as hector said , hope this helps steve |
Posted By: sandylakeimplement
Date Posted: 18 Oct 2010 at 2:50pm
|
Thanks fellows but what are you meaning by "spring"? It is an E model. We are aware of the dipstick & fill plug under the seat but we assume there is a second sump somewhere for the second section of the pump since the pumps two intake ports are isolated from each other. Could one of you call us on our toll free #? S>L>I ------------- Sandy Lake Implement Sandy Lake, PA 724-376-2489 www.sandylakeimp.com FIND US ON FACEBOOK |
Posted By: gemdozer
Date Posted: 18 Oct 2010 at 5:38pm
| The oil tank reserve is near the spring (rigid beam) near the startor between the motor and belhousing. |
Posted By: steve aust
Date Posted: 19 Oct 2010 at 4:48am
| IF You take the sump guard off there should be a tank underneath the motor between the sump and the bell housing ,the spring or equalising beam is between the track frames and has a pivot in the centre supporting the whole front of the machine |
Posted By: steve aust
Date Posted: 19 Oct 2010 at 4:58am
 |
Posted By: steve aust
Date Posted: 19 Oct 2010 at 5:15am
 |
Posted By: steve aust
Date Posted: 19 Oct 2010 at 5:27am
Models can vary, I have two ec models ,the later model machine has the settup in the second picture and the other earlier machine has the settup in the last picture hope you can mach something up here with yours ,if you follow the oil lines should be able to work it out . steve
|
Posted By: steve aust
Date Posted: 19 Oct 2010 at 5:45am
model b and e transmission lube pump from parts book shows two strainer filters at pump
|
Posted By: steve aust
Date Posted: 19 Oct 2010 at 6:16am
|
I think the last picture is what you were after ( when you said tandem pump thought you meant the one on the motor that supplies oil to work the steering clutches . I have only a parts book , i think there is only one dip stick and the pump takes oil from the botem of the trans in two places, |
Posted By: steve aust
Date Posted: 19 Oct 2010 at 6:22am
| also on the last picture lists item 7 as strainer assembly which can be pulled apart for cleaning. |
Posted By: gemdozer
Date Posted: 19 Oct 2010 at 4:13pm
| I check today my stering cluch oil tank and I made a mistake the dipstick is on right side motor and you can refill the tank by the dipstick hole. |
Posted By: sandylakeimplement
Date Posted: 25 Oct 2010 at 3:36pm
|
Many thanks fellows, we got the man going again! S>L>I ------------- Sandy Lake Implement Sandy Lake, PA 724-376-2489 www.sandylakeimp.com FIND US ON FACEBOOK |