What tool?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=193681
Printed Date: 22 Aug 2025 at 11:56am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: What tool?
Posted By: JPG AUSTRALIA
Subject: What tool?
Date Posted: 22 Feb 2023 at 5:44pm
|
Anyone know this tool? Has a sharp edge on curve section so not a piston ring cleaner was in the allis parts collection. Thanks uploads/672/received_1552587331871831.jpeg" rel="nofollow - received_1552587331871831.jpeg |
Replies:
Posted By: Gary
Date Posted: 22 Feb 2023 at 5:54pm
|
Post a 'close-up' of the other side of each of the 'ends'. G |
Posted By: steve(ill)
Date Posted: 22 Feb 2023 at 7:30pm
|
sure looks like a piston groove cleaner... ------------- Like them all, but love the "B"s. |
Posted By: JPG AUSTRALIA
Date Posted: 22 Feb 2023 at 8:40pm
 polished cutting edge up, has this both sides, like a knife
|
Posted By: KJCHRIS
Date Posted: 22 Feb 2023 at 10:35pm
|
I'll agree, it started as a piston ring groove cleaner, cutters would've fastened on the stove bolt/nut. Someone has sharpened it to clean something else. ------------- AC 200, CAH, AC185D bareback, AC 180D bareback, D17 III, WF. D17 Blackbar grill, NF. D15 SFW. Case 1175 CAH, Bobcat 543B, |
Posted By: Fred in Pa
Date Posted: 24 Feb 2023 at 11:42am
|
Don't see enough evidence or resemblance to any ring groove I ever used in past 40 years to think its a piston ring groove cleaner . ------------- He who dies with the most toys is, nonetheless ,still dead. If all else fails ,Read all that is PRINTED. |
Posted By: 200Tom1
Date Posted: 24 Feb 2023 at 9:13pm
|
It doesn't look like any piston ring grove cleaner I have ever used. I googled ring grove cleaners and it looks nothing like any of them. I have seen that tool before but I cannot remember its purpose. If I can remember, I will print off a picture and take around to my mechanic friends on Monday and see if 1 of them can tell us what it is used for. |
Posted By: plummerscarin
Date Posted: 24 Feb 2023 at 9:37pm
| I have one similar to that. Yours is missing the cutter that bolts on opposite the curve side. Since someone sharpened the curve side, is no longer useful as a ring groove cleaner |
Posted By: JPG AUSTRALIA
Date Posted: 25 Feb 2023 at 6:42am
| No one has sharpened the curve side,its made that way! I just linished it up to show one side of the blade for everyone.I’ve used and seen enough ring groove cleaners to know its not one. |
Posted By: jaybmiller
Date Posted: 25 Feb 2023 at 8:17am
|
I'm wondering what the nut and bolt were for ? I can't see a ring groover needing them.... ------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
Posted By: plummerscarin
Date Posted: 25 Feb 2023 at 8:44am
  Well if it's not a ring groove cleaner then I have found an alternative |