Deutz-Allis HD 490 Needles ...
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=192871
Printed Date: 29 Dec 2025 at 12:14pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Deutz-Allis HD 490 Needles ...
Posted By: tbran
Subject: Deutz-Allis HD 490 Needles ...
Date Posted: 11 Jan 2023 at 8:51am
|
... in need of a pair of needles for a Deutz Allis HD 490 small square baler. 1 2023 070 796.00 pn... This is to try to save the HD490 that was on the Loretta Lynn Farm. ------------- When told "it's not the money,it's the principle", remember, it's always the money.. |
Replies:
Posted By: darrel in ND
Date Posted: 11 Jan 2023 at 10:23am
|
Can't help you, but I'd like to see some pictures of that baler. Thanks Darrel |
Posted By: ryan(IN)
Date Posted: 11 Jan 2023 at 12:19pm
|
I tried my Deutz Fahr to Deutz Allis cross ref book but it doesn’t show up in there not sure where you’d find one yet. Try a Deutz ag dealer? ------------- ryan 1984 8070 FWA,1979 7060,1975 7040,1971 190,1960 D-17D,1957 D-14, 196? D-19G, 1975 5040,1971? 160,1994 R62 |
Posted By: tbran
Date Posted: 11 Jan 2023 at 12:24pm
|
tHANKS, we did... ------------- When told "it's not the money,it's the principle", remember, it's always the money.. |
Posted By: allisrutledge
Date Posted: 11 Jan 2023 at 9:13pm
|
Tim, There are some of those balers in Canada, I saw 2 at a jockey lot north east of Stratford Ontario,one red and one a later DA model hardly used. I'm not sure if they will part out but may be worth a call. Someone near there may chime in with the name of the place. Help Calvin! ------------- Allis Chalmers still exist in my mind and barns |
Posted By: bill2260
Date Posted: 12 Jan 2023 at 6:41am
| Try sandy lake implement |
Posted By: exSW
Date Posted: 12 Jan 2023 at 7:25am
|
You might try Phil's Service in Columbiana,OH. Old Allis turned Kubota dealer. They had a lot of old green inventory they were getting rid of. ------------- Learning AC...slowly |
Posted By: Orangeisgreat190
Date Posted: 12 Jan 2023 at 4:55pm
| I will recommend my parts guy. Call Ohio AgEquipment in Millersburg Ohio and ask for Duane Mickley. Phone is three 3 zero six 7 four seven thousand. He is very experienced in all AGCO equipment but specializes in Allis Chalmers, Gleaner, and Deutz. If anyone can find them, he is your guy. He was around during the transition from AC to Deutz. At the time he sold both AC and Deutz, then merged his dealership into Deutz Allis. Very knowledgeable guy who may be able to help. Good luck. |
Posted By: Ed (Ont)
Date Posted: 12 Jan 2023 at 7:13pm
| Just a note to the guys that are telling Tim to try an Agco dealer. He is agco dealer. Lol. Maybe Calvin knows somebody here in Canada. He is a wealth of info. |
Posted By: Ed (Ont)
Date Posted: 12 Jan 2023 at 7:23pm
| Stone Age Equipment here in Ontario has a complete unit listed for $2900. Maybe a last resort fix!!!! And have some parts left over. |
Posted By: Ed (Ont)
Date Posted: 12 Jan 2023 at 7:42pm
|
balerparts.co.uk seems to have some listed. Who knows how current that is or if they would ship. shipping would be more than the part. |
Posted By: Ed (Ont)
Date Posted: 12 Jan 2023 at 8:17pm
|
Posted By: Ed (Ont)
Date Posted: 12 Jan 2023 at 8:19pm
|
Posted By: allisrutledge
Date Posted: 12 Jan 2023 at 8:46pm
|
Stone age ,that's it! ------------- Allis Chalmers still exist in my mind and barns |
Posted By: Ed (Ont)
Date Posted: 13 Jan 2023 at 10:21am
| Found a complete 480hd up here in Ontario as well on a site called Kijiji. Kinda like craigslist. Ad #1646245861. Big money but it looks like brand new and includes a basket. $6000. |
Posted By: Ed (Ont)
Date Posted: 14 Jan 2023 at 3:21pm
| Just wondering if you found the needles for your baler? Would be a nice piece to save! |
Posted By: agcodick
Date Posted: 14 Jan 2023 at 10:44pm
| Try Fry's in Pa. They gave about 10 of those for parts |
Posted By: tbran
Date Posted: 15 Jan 2023 at 11:14pm
|
Thanks for all the help guys - will check everything out... ------------- When told "it's not the money,it's the principle", remember, it's always the money.. |
Posted By: exSW
Date Posted: 16 Jan 2023 at 8:12am
I sent you a pm. ------------- Learning AC...slowly |
tbran wrote:Posted By: allisrutledge
Date Posted: 16 Jan 2023 at 9:14pm
|
I forgot to ask Tim, was there any shear pins in the tool box with Sams fingerprints on them? ------------- Allis Chalmers still exist in my mind and barns |
Posted By: Mikez
Date Posted: 17 Jan 2023 at 10:58pm
| Any pictures of baler |
Posted By: tbran
Date Posted: 18 Jan 2023 at 9:21pm
|
Sam had all his finger prints burned off, not for espionge reasons but for touching hot exhaust pipes :-) ------------- When told "it's not the money,it's the principle", remember, it's always the money.. |