Construction and other equipment

Print Page | Close Window

HD4

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=192860
Printed Date: 02 May 2024 at 11:40am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: HD4

Posted By: Mike K
Subject: HD4
Date Posted: 10 Jan 2023 at 7:41pm

How to remove final drive shaft to remove brake on right.

There is a pin in the shaft or is this a clip.

cannot visual see

Replies:

Posted By: albatros_3
Date Posted: 11 Jan 2023 at 7:48am

It is a clip. I bought a 12" flat head screw driver and bent the end 90 degrees about an inch from the end. I was able to work it under the clip and pull it out. Then slide in the axle shaft.

Posted By: pinball
Date Posted: 11 Jan 2023 at 8:44am

i did the same thing on mine. worked fine. good luck.

Posted By: albatros_3
Date Posted: 11 Jan 2023 at 9:10am

Go to the link for a picture of the clip so you know what it looks like.

https://www.tpaktopc.net/images/ac/AC_233906_DRIVE_SHAFT__RETAINER.jpg" rel="nofollow - https://www.tpaktopc.net/images/ac/AC_233906_DRIVE_SHAFT__RETAINER.jpg

Posted By: Mike K
Date Posted: 12 Jan 2023 at 9:54pm

Thanks for all the advice

Posted By: Mike K
Date Posted: 12 Jan 2023 at 10:00pm

Once I pulled the clip the rest was easy.

all the post I googled said it was such a pain. Not so.

Easy peasey