Help with 7580 that stalls when releasing clutch
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=187628
Printed Date: 05 Oct 2025 at 3:28pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Help with 7580 that stalls when releasing clutch
Posted By: Ihtravelall
Subject: Help with 7580 that stalls when releasing clutch
Date Posted: 12 Apr 2022 at 3:23pm
| Hi All. New to the forum. I am working on a 7580 that locked up. Now regardless of what range or gear is selected, even with all selectors in neutral it stalls when releasing the clutch. Any tips on what to check first would be greatly appreciated before actually pulling big parts out. Thanks! |
Replies:
Posted By: DrAllis
Date Posted: 12 Apr 2022 at 5:02pm
| Probably the input shafts to the 5-speed main transmission are welded together. |
Posted By: Ihtravelall
Date Posted: 12 Apr 2022 at 7:13pm
| This is what I was expecting. Appreciate the opinion. If we pull the tranny for repair, will we have a difficult time sourcing parts? Thanks again! |
Posted By: DrAllis
Date Posted: 12 Apr 2022 at 7:38pm
| I have no idea what is available for new parts from AGCO. Used parts from a 7010-20-40-45-60-80 would be the same. NOT a 7030-50. |
Posted By: Mikez
Date Posted: 12 Apr 2022 at 7:47pm
|
welcome to the forum. Post the part numbers. |
Posted By: SteveM C/IL
Date Posted: 13 Apr 2022 at 9:58am
That's encouraging to know....
|
DrAllis wrote: